Vacuum Type Heating Pressure Shaping Machine
Vacuum chamber forming has attained high precision and stable production.
Suitable for packing. Rubber product, keyboard, O-ring, Medical rubber and shock proof parts. The most economical model type is easy to operate and the speed of vulcanization is very quickly. This speed of exhausted is 2 sec/700 Hg. This model is suitable for three layer releasing.

Features

1. Because of vacuum chamber forming, this is not any gas defect due to air and gas accumulation.

2. Smooth flow of rubber material enables the charge stock to be greatly reduced.

3. Less loss due to burrs enables the charge stock to be greatly reduced.

4. Since the hot platen is equipped inside the vacuum chamber, heat dissipation loss is reduced. Energy saving operation with better thermal efficiency will be attained.

5. There is little variation of die temperature distribution.

6. Because of external die opening, installation and positioning onto the upper hot platen are not required.
Clamping force
200 TON
250 TON
300 TON
Stroke
250 mm
300 mm
300 mm
Plate Size
520*530mm
560*600 mm
600*650 mm
Cylinder Diameter
355 mm
400 mm
450 mm

Hydraulic pump motor

7.5HP

10HP

15HP

Vacuum pump motor

3HP 3HP 3HP
Power
22.5 KW
26.5 KW
32.5 KW

Machine dimension (LXWXH)

3MX1.8MX2.1M 3.3MX1.8MX2.1M 3.5MX2.0MX2.1M

50TON Vacuum Type Heating Pressure Shaping Machine
   

Type

HSI-50S

Claming force (TON)

50
Size of platen (mm)

300*300

Cylinder diameter (mm)

180

Stroke (mm)

250

Motor (HP)

5

Speed (mm/sec)

1~50

Power Consumption (KW)

4.2

Weight (KG)

2000

Machine dimension (mm) 1500*800*1800